Notifications
Clear all
The vehicle was in an accident. The previous owner says it was not. The fault in INPA is "IC6 Built in" = "no"
All the others are "Yes" so I'm assuming its the actual module that has an issue.
Topic starter
Posted : 09/26/2022 1:32 pm
If the vehicle was in an accident with deployment the module will store a lot of crash history and the codes could be random as well.
The best thing to do is get the crash history reset/removed and then scan the vehicle for codes if the light still comes on.
Hope this helps!
Posted : 09/26/2022 1:33 pm