Notifications
Clear all
I have a 2013 BMW 650i with codes C95409 & C9540B
The car has been in an accident where the seat airbag and restraining system went off & I replaced both seats Please advise me on what to do?
Topic starter
Posted : 09/26/2022 1:04 pm
Did you send the module to us for a module reset service? If not send it to us for a reset service.
Posted : 09/26/2022 1:05 pm
No I didn't check the codes. You said you had airbags deploy. Normal case is to either replace the module or get the module reset. The guarantee we give you is a 1 year warranty on the module reset service. How much would a new airbag control module cost you. Is it worth a shot, I think it is.
Posted : 09/26/2022 1:06 pm
Yes an OPDS module normally will need to be recalibrated.
Posted : 09/26/2022 1:08 pm
If you still have the original ones and the modules match up yes do a swap out. You still might have to have it recalibrated. It is worth trying.
Posted : 09/26/2022 1:09 pm
Did you check the codes? Are you positive this will fix my codes?
Topic starter
Posted : 09/26/2022 3:32 pm
I changed both seats which have the airbag and seat belt as well as the module I think. I also replaced the side air bag. Since it was T boned' The code's are seats codes? The code's are seats codes? Is there a seat module that needs to be reset?
Topic starter
Posted : 09/26/2022 3:36 pm
Thank you
Topic starter
Posted : 09/26/2022 3:38 pm
Do you guys do that? Or do you recommend I take off the old ones from the old seat & put them in the new seats?
Topic starter
Posted : 09/26/2022 5:05 pm