Notifications
Clear all
2017 Toyota Prius C I've been steadily upgrading. I picked up faux leather seats from a wrecked vehicle. The seats airbags did not deploy . However, the airbag light did come on when I connected the harness after swapping the driver seat. My best guess from your educational info is that either my car is seeing the VIN mismatch or the airbag module has stored crash data that is causing the warning light in my non-wrecked car. According to my BlueDriver OBD2 with SRS and ABS reader, the code is B1871.
Is this something you can reprogram?
Topic starter
Posted : 04/14/2023 7:37 pm
If your reader has live readings for the SRS check all the airbags including the one that is coding. If all of them are within specs 2-3 ohms of resistance except that one. Recheck all your connectors under the seat and look at the pins in each connector to make sure none are bent or pushed back
Posted : 04/14/2023 7:39 pm