Notifications
Clear all
hey. i got Mercedes c300 and get codes B007F13, B007E13. i changed front seatbelts (used from ebay) and nothing changed. i m not sure if this is seatbelt fault or i need reset a module. a maybe rebuild a seats belts?
Topic starter
Posted : 03/14/2022 2:07 pm
For just a seatbelt code a reset would not be needed. Either you have a faulty seatbelt, damaged wiring or a faulty module. Your seatbelts should have between 2-3 ohms of resistance at the squibs. If they are not there ship the seatbelts to us for repair. If they are within range, then you have one of the other issues.
Posted : 03/14/2022 2:08 pm
1.8 ohms is a little low but 0.001 very bad. We can repair those for you. You can call CS and they will help you with getting it set up or you can visit the website MyAirbag.com an set it up yourself.
Posted : 03/14/2022 2:10 pm
Between 2-3 ohms 2.0 Ohms would still work.
Posted : 03/14/2022 2:11 pm
My seat belt looks like have two conectros for airbags i send you picture with ohm. Driver and passanger side one of conectro has 1.8 second 0
Topic starter
Posted : 03/14/2022 4:35 pm
But on this second one resistance have to be 2ohm?
Topic starter
Posted : 03/14/2022 6:04 pm