Notifications
Clear all
I'd like to confirm what service I need for my 2011 Ford E-250 before sending any parts. Please find data & fault codes below
Fault codes:
B1213:13 Passenger Seatbelt Buckle Pretensioner Deployment Control Circuit Open (Status ODDTC)
B1213:13-3B Passenger Seatbelt Buckle Pretensioner Deployment Control (Status CMDTC)
This makes me believe the buckle pretensioner on the passenger side has gone bad, however I have not been in an accident and I'd expect a infinite resistance when I test it wilt my multimeter (which I did not get).
When reading the resistance settings with my SRS meter, I got the following:
Driver seatbelt pretensioner deployment control resistance: 2.3-2.35 ohm
Passenger seatbelt pretensioner deployment control resistance: 3.4-3.45 ohm
See video attached for more information.
Can you help me confirm whether or not my passenger side buckle tensioner is the problem here? Or should I keep looking for something else. Once I know what it is, I can send the parts to you within a day for repair.
Thank you!
Topic starter
Posted : 11/16/2021 12:20 pm
Do you offer service on the wiring as well? If needed, I can send the buckle pretensioner + wires/connector for repair.
Topic starter
Posted : 11/16/2021 12:21 pm
yes we do, please include a note on the unit
Posted : 11/16/2021 12:22 pm
yes, the passenger side has too high of resistance... Resistance should be between 2-3 OHMs..
You can also check the wiring to make sure it good
Posted : 11/16/2021 2:48 pm