Notifications
Clear all
I have used you guys several times and rebuild cars all the time. I recently bought a truck , it’s has the air bag light on and I have a cord scan tool it’s giving me a b1193 code. Which I figure is the main air bag module . Says crash event storage locked and full. No seat belts or bags and what not are locked or faulted. I figured the best thing to do is send in the module to you guys. Just confirming. Thanks so much I attached the fault as well
Topic starter
Posted : 06/06/2022 8:30 pm
Yes, feel free to send the unit in!
The only thing I would say is still to check the seat belts and air bag resistance with an ohms meter because it may not look deployed, but if the resistance is off, the light will still be on after the reset!
A good resistance should be 2-3 ohms
Posted : 06/06/2022 8:31 pm