Light came back

 If the airbag light comes back on it is most likely because of a bad plug connection at airbag, seat belt, or other sensors. You should first check all connections. If you do find a bad harness plug connection somewhere and fix it, then the light will turn off next time you turn your ignition on. You may need to use a diagnostic scan tool to scan to see where the problem is and then clear those codes with a scanner.

When you send your part to us, we clear crash history and crash data. If your vehicle was in an accident then the module will store crash history. This is what locks the module and prevents it from being used again. Dealership will tell you to replace airbag control module. We reset remove crash history and crash data from airbag control modules only. Send airbag control module for reset only if the vehicle was in an accident/collision.

Check for unseated connections at any bags or squibs that were replaced. Chances are you have a bad connection there, and came loose after road shock from driving. Fault codes will tell you where to begin looking