Notifications
Clear all

codes B0020-1A and B00A0-68

 

I received my airbag module and installed it and I'm getting two codes B0020-1A and B00A0-68 and checked the connections cleared the codes and still comes back immediately after start up... I was wondering how to get this cleared to get my airbag light out ...

Quote
Topic starter Posted : 08/15/2023 5:15 pm
Serge - MyAirbags Team
Noble Member Moderator

The code b0020-1a is left side airbag deployment control circuit resistance below threshold.

Code B0020 Ford Possible Causes Faulty Left Seat Side Airbag
Left Seat Side Airbag harness is open or shorted
Left Seat Side Airbag circuit poor electrical connection

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

The code B00a0-68
To reset this code you will need to use a diagnostic scan tool that can communicate with the Airbag Control Module and make necessary changes if needed.
1. Navigate to SRS Airbag Menu
2. Look for a menu option called "Occupant "
3. There you may see one option or two options. Clear codes and Zero out the weight
4. First zero out the weight sensor (occupant seat sensor). Then press clear codes
5. If the passenger seat has been replaced and the sensors in the seat were not transferred from the original seat to the seat that is now in the vehicle can also cause airbag issues.

It was our pleasure to assist you! Please let us know if there is anything else we can help you with.

Thanks for choosing MyAirbags!

ReplyQuote
Posted : 08/15/2023 5:38 pm
Share: