Notifications
Clear all
I just received my airbag module and my seatbelt, should I unhook the battery for 30 minutes prior to installing these items?
Topic starter
Posted : 09/07/2022 7:15 pm
Yes, all airbag srs components must be installed and connected properly before installing the airbag control module. This includes air bags, seat belts, clock spring and impact sensors.
Disconnect the battery and bolt down the module and then connect the harness wiring plugs.
Wait 3 minutes before installing the airbag module in the vehicle.
Bolt down module with all bolts and then connect harness plugs. (if not then, could deploy roof airbags and seat belts)
Vehicle needs to be flat on the ground. Not elevated on a jack or lift. (if not then, could deploy roof airbags and seat belts)
Reconnect battery cables
Posted : 09/07/2022 7:15 pm
You're welcome!
Posted : 09/07/2022 7:16 pm
Thank you!
Topic starter
Posted : 09/07/2022 9:43 pm