Notifications
Clear all
I have a 2010 toyota tundra, the side air bags are out because I was off-roading and the truck tilted more than usual. Of course that also locked my seatbelt / the charge blew.
would a SRS module reset fix the seatbelt if i get it replaced with OEM parts or get a recharge from you? OR would I have to also replace the side airbags AND get the module reset before the new / rebuilt seatbelt will work as if new / original factory condition again?
I am not worried about soft / hard codes at the moment... (if I do replace the airbags later I can always pay for another reset... also if I only replace side airbags on one side... and the module reset... the side with replaced airbag will work as if new or would they both need to be replced at the same time? (asking because I never have ppl sit on the passenger side... so I only care about the driver side working).
Thanks
Topic starter
Posted : 04/18/2022 4:19 pm
You would have to get your airbags tested by a mechanic to see if those need to be replaced as well. We are only able to repair the belt and reset the airbag module. Resetting the module doesn't fix your belt, you have to get the belt fixed and the module reset.
If you wish to send us your parts, you can create your order on our website, MyAirbags.com.
Thank you!
Posted : 04/18/2022 4:20 pm
Your belts, airbags and sensors are all connected. All parts must be taken care of before the module is reset otherwise your airbag system will not work properly. The belts will be able to be installed, however, they will not work properly or lock up in the event of an accident until you get those airbags replaced.
Thank you.
Posted : 04/18/2022 4:21 pm
this does not answer my question so I will try to word it better...
currently: side airbags are out and both seatbelts are locked (charge blown in pre-tensioner)
If I get recharged or brand new seatbelt units AND get the air bag module reset by you folks. My seatbelts should work as if the truck just left the dealership.
I know the airbags won't work because I did not replace / repair them BUT I am trying to figure if I can get my seatbelts working as new again without the airbag fix / replacement or would I need to get that fixed as well for my new / recharged seatbelts to work again (after you reset my airbag module).
Hope this is a bit clearer... if you are not sure, I'd appreciate it if you could forward it to the technicians / someone who would know.
Thanks!
Topic starter
Posted : 04/18/2022 6:47 pm