Notifications
Clear all
Vehicle was in accident and airbags deployed. Airbags have been replaced, and the code scanner cleared five codes successfully. Codes 9080 and 9083 keep coming back after clearing with scanner. Will your module reset clear these codes or will they come back when module is reinstalled?
Topic starter
Posted : 12/02/2024 1:27 pm
I recommend sending the module in for a reset. The scanner can only clear soft codes, but any codes stored after an accident need to be reset here. Please feel free to send the module whenever you're ready! MyAirbags - We Help You Save Money On Seatbelt And Airbag Module Repairs
Posted : 12/02/2024 1:34 pm
The codes refer to WSS calibration. If those codes return after sending the module for a reset, will I get a refund?
Topic starter
Posted : 12/02/2024 1:35 pm
If Crash history is stored in the module, then it should not be there after our reset service. The only codes that would keep popping up after you install the module would be codes for parts that still need to be repaired or replaced in the safety system
Posted : 12/02/2024 1:36 pm