Notifications
Clear all
I have a 2001 bmw m5 front end collision. The steering wheel airbag went off and there is a fault for seatbelt ,steering wheel, main module,and the BST battery terminal. What do I have to send you to have the light off and computer reset. Let me know what I need to do
Topic starter
Posted : 02/07/2022 3:08 pm
What we do here is reset the crash history on the airbag module and work on the seat belts if they are locked up or not retracting.
So if that's the case you would need to send the seat belts in and get the module reset.
Here is the link to what services we do for you vehicle.
https://www.myairbags.com/search/?make=BMW&model=M5&year=2001
Hope this helps!
Posted : 02/07/2022 3:09 pm
Yes If the seat belts are good then just send the module in for reset!
Thanks!
Posted : 02/07/2022 3:10 pm
Ok so my seatbelts still work as they should. So your saying the only thing I need to send you is the main module and that will clear all the airbag faults in the car. If that is the case I will send u the module
Thank you
Topic starter
Posted : 02/07/2022 5:36 pm
The seat belts may still work, but usually they will lock after accident because they have a pyro sensor that blows and locks the seat belt. If your seat belts are blown you will get a DTC code on the scanner that shows a bad seat belt pretensioner and/or bad seat belt buckle (the bottom clicker part with the red button). You can send us the seat belt for repair if yours is bad.
We can clear the crash data and crash codes in the air bag control module. When you get it back and all srs parts are good like (airbags, seat belts, impact sensors) then the airbag light will turn off. However, if one of the components is bad, like bad air bag or bad seat belt, then the airbag light will still be on. But you will not need to send the module back, it will still be good.
I hope this answered your question. If not, let me know!
Posted : 02/13/2022 2:43 am